V12 Release

Lukas_Jackson · Aug 24, 2015

One of my vps reset itself, I guess due to memory shortage (768MB). Last seconds of cpu and disk usage

Code:

(9a188722ec8085927a99b5afd9835c063ecac26bff2d4bc9f0902525570b3165, 1), scriptSig=) - 1440438560
2015-08-24 22:22:25 ResendWalletTransactions()
2015-08-24 22:23:36 peer=1928 using obsolete version 70051; disconnecting
2015-08-24 22:23:36 ProcessMessage(version, 105 bytes) FAILED peer=1928
2015-08-24 22:24:54 CActiveMasternode::SendMasternodePing() - Relay Masternode Ping vin = CTxIn(COutPoint(63104594ab0ab1d2d34fb8ef0676c26f78812a372dcb08709ccf7e5763076194, 0), scriptSig=)
2015-08-24 22:25:12 receive version message: /darkcoinseeder:0.1.2/: version 70103, blocks=320000, us=123.456.78.9:9999, peer=1929
2015-08-24 22:25:39 CheckBlock() : skipping transaction locking checks
2015-08-24 22:25:39 CheckBlock() : skipping transaction locking checks
2015-08-24 22:25:39 CheckBlock() : skipping transaction locking checks
2015-08-24 22:25:39 UpdateTip: new best=000000000007ca137cc71dbd545a1cc939382041c817b05e85abbf911cd08fec  height=324909  log2_work=61.664479  tx=1310796  date=2015-08-24 22:19:51 progress=0.999982  cache=2440
2015-08-24 22:25:40 ProcessNewBlock : ACCEPTED
2015-08-24 22:26:03 receive version message: /darkcoinseeder:0.1.2/: version 70103, blocks=320000, us=123.456.78.9:9999, peer=1930
2015-08-24 22:27:54 receive version message: /darkcoinseeder:0.1.2/: version 70103, blocks=320000, us=123.456.78.9:9999, peer=1931
2015-08-24 22:30:02 CActiveMasternode::SendMasternodePing() - Relay Masternode Ping vin = CTxIn(COutPoint(63104594ab0ab1d2d34fb8ef0676c26f78812a372dcb08709ccf7e5763076194, 0), scriptSig=)
2015-08-24 22:35:09 CActiveMasternode::SendMasternodePing() - Relay Masternode Ping vin = CTxIn(COutPoint(63104594ab0ab1d2d34fb8ef0676c26f78812a372dcb08709ccf7e5763076194, 0), scriptSig=)
2015-08-24 22:35:37 Timeout downloading block 00000000000a71cbc69a7c0d16d2ef26c97bf09a4dcda8beec7d8e8156c3e98d from peer=1181, disconnecting

Another one only deamon crashed. This one have 1gb of memory:

Code:

31.16.50.15:41532
2015-08-24 22:04:36 dseg - Sent 1 Masternode entries to 31.16.50.15:41532
2015-08-24 22:04:39 dseg - Sent 1 Masternode entries to 31.16.50.15:41532
2015-08-24 22:04:45 dseg - Sent 1 Masternode entries to 31.16.50.15:41532
2015-08-24 22:04:46 dseg - Sent 1 Masternode entries to 31.16.50.15:41532
2015-08-24 22:04:49 dseg - Sent 1 Masternode entries to 31.16.50.15:41532
2015-08-24 22:04:56 dseg - Sent 1 Masternode entries to 31.16.50.15:41532
2015-08-24 22:04:58 dseg - Sent 1 Masternode entries to 31.16.50.15:41532
2015-08-24 22:05:00 dseg - Sent 1 Masternode entries to 31.16.50.15:41532
2015-08-24 22:05:03 dseg - Sent 1 Masternode entries to 31.16.50.15:41532
2015-08-24 22:05:06 dseg - Sent 1 Masternode entries to 31.16.50.15:41532
2015-08-24 22:05:31 dseg - Sent 1 Masternode entries to 31.16.50.15:41532
2015-08-24 22:05:32 CheckBlock() : skipping transaction locking checks
2015-08-24 22:05:32 CheckBlock() : skipping transaction locking checks
2015-08-24 22:05:32 CheckBlock() : skipping transaction locking checks
2015-08-24 22:05:33 UpdateTip: new best=00000000000d0c5140facc3d3852d571ae50cc03cf1cb0f3cb328b68e6922c0c  height=324901  log2_work=61.66444  tx=1310772  date=2015-08-24 22:04:59 progress=0.999998  cache=3105
2015-08-24 22:05:33 ProcessNewBlock : ACCEPTED
2015-08-24 22:05:41 dseg - Sent 1 Masternode entries to 31.16.50.15:41532

moli · Aug 25, 2015

Funny Bitcoin price is tanking and Dash MN memory keeps rising... :tongue:

Flare already submitted a ticket for the problem here: https://github.com/dashpay/dash/issues/568

camosoul · Aug 25, 2015

Entering the MN payment queue...

I shut down for a couple days and then turned them all back on, got them synced, and ran start-many on cold wallet...

Payments come in completely random spread out over about 72 hours... Two haven't been paid at all, some repeated... Sigtimes are identical...

I realize it wasn't going to be as perfectly ordered as when on the centralized monitor box, but wow, this is wacky... If it's working well, whatever, don't care. Just concerned it might not be right since variance is way, way more than anticipated...

OT: Wow, look at the market tank over this blocksize crapola... talk about dysfunction...

MangledBlue · Aug 25, 2015

moli said:
Maybe rpi can't handle v12 due to not enough memory?

It actually ran for 5 days - got paid - then died 12 hours later

it has 1GB of memory

I got it back up and running just now - see what happens

thinking about testing a new crontab setup
but
my cold side needed rebooted/restarted aslo
so
my crontab thoughts would not help if cold-side needs to re-boot

have to think about it

MangledBlue · Aug 25, 2015

I didn't have to go far

https://bitcointalk.org/index.php?topic=421615.msg12233642#msg12233642

----------------------------------------
UdjinM6 Hero Member

How to start dashd automatically again after it crashed.

run:
Code:
crontab -e

add line:
Code:
*/1 * * * * /home/dashuser/mn_watch.sh >/dev/null 2>&1

use any editor you like and save this as "mn_watch.sh" file in user "dashuser" home directory:
Code:
#!/bin/bash
if [ -z `pidof dashd` ]; then
/home/dashuser/dashd
fi

add executable flag:
Code:
chmod u+x mn_watch.sh

PS. Use appropriate username, not "dashuser" from my example

I also assumed that dashd is located in your user home directory, change path if needed.

PPS. not tested but should work

EDIT: ooops, tested and fixed

moli · Aug 25, 2015

MangledBlue said:
It actually ran for 5 days - got paid - then died 12 hours later

it has 1GB of memory

I got it back up and running just now - see what happens

thinking about testing a new crontab setup
but
my cold side needed rebooted/restarted aslo
so
my crontab thoughts would not help if cold-side needs to re-boot

have to think about it

Patch for memory leak is coming: https://github.com/dashpay/dash/commit/402d821529bf5e0c01cf685918e006e17c9e2143

v48

TaoOfSatoshi · Aug 25, 2015

Right on time, as always!

eduffield · Aug 25, 2015

*********** v12.0.48 *************

- Fixed memory leak
- Fixed the bug that made masternodes hang sometimes (when waiting for remote activation)

https://www.dashpay.io/downloads/

Sub-Ether · Aug 25, 2015

eduffield said:
*********** v12.0.48 *************
- Fixed memory leak
- Fixed the bug that made masternodes hang sometimes (when waiting for remote activation)

Another super fast update by the team:grin:.
Am wondering for future reference, why was this missed in testnet and also does the memory leak cause database corruption ?

thelazier · Aug 25, 2015

Sub-Ether said:
Another super fast update by the team:grin:.
Am wondering for future reference, why was this missed in testnet and also does the memory leak cause database corruption ?

we have only 100+ MN on testnet, no database corruption for this leaks, it's mostly about MN payment winners, IMO

SirHikmat · Aug 25, 2015

victorbx said:
11 Days without a payment :sad:

"vin" : "CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 4294967295), coinbase )",
"service" : "[::]:0",
"pubKeyMasternode" : "XtEGzjn4HXeWpGZCMzafLy9mjUrNWyxmq6",
"status" : "Not capable masternode: Hot node, waiting for remote activation."

Sorry , My bad...

just needed to wait a little bit longer :

"vin" : "CTxIn(COutPoint(1c6e218ceca6f3aedf55e48a6d7e2d4295a5c40955f24c0fb3fc96ac315b6c1b, 1), scriptSig=)",
"service" : "37.142.217.238:9999",
"pubKeyMasternode" : "XtEGzjn4HXeWpGZCMzafLy9mjUrNWyxmq6",
"status" : "Masternode successfully started"

Is your pubKeyMasternode correct?

MangledBlue · Aug 25, 2015

has the source code been updated??

I downloaded - 2 hours to compile and still on 47?? ugh

or maybe the Pi versions can also be released on dashpay.io/downloads ...??

AjM · Aug 25, 2015

SirHikmat said:
Is your pubKeyMasternode correct?

No, its wrong address.

flare · Aug 25, 2015

MangledBlue said:
has the source code been updated??

I downloaded - 2 hours to compile and still on 47?? ugh

or maybe the Pi versions can also be released on dashpay.io/downloads ...??

Compiling for you

https://dashpay.atlassian.net/builds/browse/DASHP-REL-3/artifact

MangledBlue · Aug 25, 2015

flare said:
Compiling for you

https://dashpay.atlassian.net/builds/browse/DASHP-REL-3/artifact

THX Sir
Any chance of getting Pi added to Dashpay.io/download ??

I don't mind compiling from time to time but - why is the source code only 12.1.0?? :-(

flare · Aug 25, 2015

MangledBlue said:
THX Sir
Any chance of getting Pi added to Dashpay.io/download ??

I don't mind compiling from time to time but - why is the source code only 12.1.0?? :-(

Where did you get the source? 12.1.0 is the next development iteration - did you check out the correct branch/tag (12.0.48)?

MangledBlue · Aug 25, 2015

flare said:
Where did you get the source? 12.1.0 is the next development iteration - did you check out the correct branch/tag?

I got it [12.0.1] directly from dashpay.io - I do believe - SOURCE

same as all these seem to be 12.0.1 also
[https://dashpay.at**********uilds/allPlans.action]

9% on the Pi

edit: also - I expected to see version [41457cb] - but I see the previous version [11a0156]
.....at least on WIN32

flare · Aug 25, 2015

MangledBlue said:
I got it [12.0.1] directly from dashpay.io - I do believe - SOURCE

same as all these seem to be 12.0.1 also
[https://dashpay.at**********uilds/allPlans.action]

9% on the Pi

The source link on dashpay.io links to github, there is no source bundle to download.

MangledBlue · Aug 25, 2015

flare said:
The source link on dashpay.io links to github, there is no source bundle to download.

View attachment 1823

I clone <https://github.com/darkcoin/darkcoin>
and compile that
Worked before.....

??? ???

edit:
--------------------------------
taken from my Pi Guide:
--------------------------------
code:
cd
mkdir .dash
mkdir .ddl
cd .ddl
sudo apt-get install git
git clone https://github.com/darkcoin/darkcoin

You are now ready to Compile the DASH software, for use on the Pi2b

This Chapter will actually take the most time to complete. The process of Compiling the DASH software takes approximately two hours on the Pi2b, after you INPUT the ‘make’ command

code:
cd
cd ~/.ddl/darkcoin
./autogen.sh
./configure --with-incompatible-bdb
make clean
make

flare · Aug 25, 2015

MangledBlue said:
I clone <https://github.com/darkcoin/darkcoin>
and compile that
Worked before.....

??? ???

It should work like that, yes. If I do

Code:

$ git clone https://github.com/dashpay/dash.git

I get master, which is on 0.12.0.48

Code:

$ cat dash/configure.ac | grep VERS
define(_CLIENT_VERSION_MAJOR, 0)
define(_CLIENT_VERSION_MINOR, 12)
define(_CLIENT_VERSION_REVISION, 0)
define(_CLIENT_VERSION_BUILD, 48)

Maybe you switched to 0.12.1.x branch

Code:

$ git checkout v0.12.1.x

Code:

define(_CLIENT_VERSION_MAJOR, 0)
define(_CLIENT_VERSION_MINOR, 12)
define(_CLIENT_VERSION_REVISION, 1)
define(_CLIENT_VERSION_BUILD, 0)

V12 Release

Active member

Well-known member

Well-known member

MangledBlue

Guest

MangledBlue

Guest

Well-known member

Well-known member

Core Developer

Well-known member

Active member

Member

MangledBlue

Guest

Well-known member

Well-known member

MangledBlue

Guest

Well-known member

MangledBlue

Guest

Well-known member

MangledBlue

Guest

Well-known member