Monitor NM status using Uptime Robot / free

chaeplin

chaeplin

Well-known member
Updated.

Monitor NM status using Uptime Robot : https://uptimerobot.com/

1) Monitor status + balance or status
Monitoring Url : http://drk.poolhash.org/poolhashrate/blocks/masterstatus.txt
Monitoring Type : Keyword :
a) Darkcoinaddress:6:5 ---> if flag or blance is changed, you will get alert.
b) Darkcoinaddress:6 ----> if flag is changed, you will get alert.

2) Monitor balance
Monitoring Url : http://drk.poolhash.org/poolhashrate/blocks/masterpaystatus.txt
Monitoring Type : Keyword :
a) Darkcoinaddress:5 ---> if blance is changed, you will get alert.


http://drk.poolhash.org/poolhashrate/blocks/masterstatus.txt for status + balance or status monitoring.
(status : updated every 3 min, balance :updated every 3 hours)

Code: 
Xbx8VZiN9Y7HzronzzcNQGwJMvs5WMbJ2e:6:3
Xc21oizE7sNJVkSmfZm22CoP4G8Zvcrywg:6:3
Xc2PJQ7wGcbKD91Cxm6aAphYsW1crDX52b:0:0
Xc5pZ62EwWcYXXr3LXaPDBuaLDV7WzLXtz:6:3
Xc93sH82sCtfhzZDTWsduzmC9Kxb2jyJ8g:6:2


http://drk.poolhash.org/poolhashrate/blocks/masterpaystatus.txt for balance monitoring.
(balance updated every 3 hours)
Code: 
XbEsSx94YaAwytFnPsjnGS4SEqihKq1Y9R:-
XbG2YFnMfM262nNDe1DmDd577d7zn7s2YP:0
XbGThzt5qkBVmUhpHP51ipFYQyPfFJuTEx:3
XbKsgzt85gNw3uxaqm6ADY8g3QSKXpfhHj:4
XbMnau4AKFvKKJNbUT9QrpvwFB973wuoZP:5
XbV2dcpuT8HdcUzfmMSKCBVL6hrNGnQPB8:0
XbZE2PjKwLvZY7HcsV4pzTLdSLuaJH8JYu:6



jtWPvlu.png


With keyword XbZE2PjKwLvZY7HcsV4pzTLdSLuaJH8JYu:7
Code: 
Latest Events (up, down, start, pause)  Export Logs
Event    Date-Time    Reason    Duration
Down    03-07-2014 00:15:33    Keyword Not Found    0 hrs, 5 mins
Started    02-07-2014 23:50:31    OK    0 hrs, 25 mins
Up    02-07-2014 23:50:28    Keyword Found    0 hrs, 0 mins

Twitter mention 'Monitor is DOWN: Masterstatus' received.



Udated :Balance is changed to 'no of selected payee from block height 91796' == actual payee in a block (not including expected payee).
Updated : every 3 min.
 
Last edited by a moderator:
Suggestion:
Maybe to "My Settings" page can have setting to set time +/- xx hours, so everyone can tune site time (logs) to own country time.
Now site time is 2 hours late to my own country time.
 
AjM said:
Suggestion:
Maybe to "My Settings" page can have setting to set time +/- xx hours, so everyone can tune site time (logs) to own country time.
Now site time is 2 hours late to my own country time.
Click to expand...
'My Settings' has Timezone setting.

I have GMT+0
 
Awesome.

BUT - can someone help expaining, why after few days, one of my MN dropped from :6 to :4 ...
also when doing "masternode list" this node sees only 500MNs, while at other :)6) MN i get around 530 MNs in list?
all hosts have identical setup procedure/configuration.. and are on same IP block, so i can rule out weird network issues...

??
 
Hi Chaeplin! I want to thank you for all the work you've put into your tools, they've been very useful!

I don't know if you take requests, but if it isn't difficult, would it be possible to allow http://drk.poolhash.org/masternode.html to take querystring parameters with the payee address that would auto populate the filter? That would make bookmarking the url exceedingly simple i.e. http://drk.poolhash.org/masternode.html?filter=MasternodePayeeAddress

Thank you either way, your work is great as usual!
 
Stray said:
Hi Chaeplin! I want to thank you for all the work you've put into your tools, they've been very useful!

I don't know if you take requests, but if it isn't difficult, would it be possible to allow http://drk.poolhash.org/masternode.html to take querystring parameters with the payee address that would auto populate the filter? That would make bookmarking the url exceedingly simple i.e. http://drk.poolhash.org/masternode.html?filter=MasternodePayeeAddress

Thank you either way, your work is great as usual!
Click to expand...
Why not, I will.
 
 
Last edited by a moderator:
 
That is presidentially awesome! Running some script on that file should be easy :smile:
 
Thanks again el presidente for supplying us with these great MN resources!

I asked this in a different thread, but I didn't get an answer, and I think this might be the better place to ask...

Could someone tell me what each field represents in the file:
http://drk.poolhash.org/poolhashrate/blocks/masterstatus.txt

Is the second field the number of confirmations (out of 6) the MN has received?
Is the last field the number of payments received total, or out of some period of time?

I ask because I'm scripting a monitoring solution that uses that file (masterpaystatus.txt seems to have the exact same information, minus the second field, if I'm not mistaken) and will make it available as a simple service or app if I complete it (I don't like having to reset uptime robot everytime I get a payment ;)) - I just want to make sure I understand exactly what's in there. Thanks!
 
I'm guessing:
drakee said:
Is the second field the number of confirmations (out of 6) the MN has received?
Click to expand...
It's number of svXX masternodes that have this particular masternode listed as active
drakee said:
Is the last field the number of payments received total, or out of some period of time?
Click to expand...
And this one is for "no of selected payee _last 7 days"
You can use http://drk.poolhash.org/masternode.html?srch&nmstr=XbfJ1b8A7DYX9o68FMJ3ZS2qVR5EnzUN1b for investigation :wink:
 
drakee said:
Thanks again el presidente for supplying us with these great MN resources!

I asked this in a different thread, but I didn't get an answer, and I think this might be the better place to ask...

Could someone tell me what each field represents in the file:
http://drk.poolhash.org/poolhashrate/blocks/masterstatus.txt

Is the second field the number of confirmations (out of 6) the MN has received?
Is the last field the number of payments received total, or out of some period of time?

I ask because I'm scripting a monitoring solution that uses that file (masterpaystatus.txt seems to have the exact same information, minus the second field, if I'm not mistaken) and will make it available as a simple service or app if I complete it (I don't like having to reset uptime robot everytime I get a payment ;)) - I just want to make sure I understand exactly what's in there. Thanks!
Click to expand...

Sorry not updating properly.

Balance was changed to 'no of selected payee _last 7 days' == actual payee in a block (not including expected payee).

I think it's not good for monitoring with last 7 days.

Have changed to from block height 91796.
 
Last edited by a moderator:
You must log in or register to reply here.
Back
Top