Getting Mixed Signals!

B

brownbear

Member
Hi Guys,

I added a masternode using the instructions at: https://docs.dash.org/en/stable/masternodes/setup.html#masternode-setup and I'm getting missed messages as to if my MN is actually running!

Dashcentral.org says: "An active masternode with the address provided, could not be found. Please check the address!"

Dashninjia says: dmn01 ENABLED Active; dmn03 ENABLED;
Active Duration; Inactive; Last Seen: Just now (0);
Masternode is Active (100%);
Sentinel status is expired; Daemon Version Unknown; Sentinel Version Unknown;
Port Check Status is Open; Port Check Next Try ... Re-check pending

Dash-QT wallet says: "ENABLED"

VPS using command ./dash-cli masternode list full | grep -e IPADDRESS, says: "ENABLED"

VPS using command ~/dashman/dashman status, says: dashd uptime ~2 hrs, 31 min..., dashd responding (rpc): Yes; dashd running: Yes; Last block synced: Yes, ... basically looks okay.

VPS using command ./dash-cli masternode status, says: error code: -32603, error message: "this is not a masternode"

Is everything okay? If I followed the instructions at dash.org, what would I have to check to see if my MN is working for sure? and how can I trouble shoot this? Maybe this is normal for MN that has not been paid yet?

Thanks as always for your assistance!
-BB
 
brownbear said:
Hi Guys,

I added a masternode using the instructions at: https://docs.dash.org/en/stable/masternodes/setup.html#masternode-setup and I'm getting missed messages as to if my MN is actually running!

Dashcentral.org says: "An active masternode with the address provided, could not be found. Please check the address!"

Dashninjia says: dmn01 ENABLED Active; dmn03 ENABLED;
Active Duration; Inactive; Last Seen: Just now (0);
Masternode is Active (100%);
Sentinel status is expired; Daemon Version Unknown; Sentinel Version Unknown;
Port Check Status is Open; Port Check Next Try ... Re-check pending

Dash-QT wallet says: "ENABLED"

VPS using command ./dash-cli masternode list full | grep -e IPADDRESS, says: "ENABLED"

VPS using command ~/dashman/dashman status, says: dashd uptime ~2 hrs, 31 min..., dashd responding (rpc): Yes; dashd running: Yes; Last block synced: Yes, ... basically looks okay.

VPS using command ./dash-cli masternode status, says: error code: -32603, error message: "this is not a masternode"

Is everything okay? If I followed the instructions at dash.org, what would I have to check to see if my MN is working for sure? and how can I trouble shoot this? Maybe this is normal for MN that has not been paid yet?

Thanks as always for your assistance!
-BB
Click to expand...

I would check on dashninja, if you see valid (100%) and an open port there you should be fine.

Link : https://www.dashninja.pl/deterministic-masternodes.html
(fill your MN IP address or payout address at the Regexp search field)

Also make sure Sentinel is up to date (people sometimes forget that part)

* Be informed that you need to check your deterministic masternode on the deterministic page of dashninja, the old dashninja page is no longer valid. *
** If you provided a new payout address during your deterministic masternode registration, you need to search on that specific address or search on your MN ip address on dashninja **
 
Last edited:
Hi qwizzie,

thanks for writing back!

I did a little more work, things look like they're improving. I'll be back if I get stuck again! ;-)

thanks again for your help!
BB
 
Last edited:
You must log in or register to reply here.
Back
Top