Search results

Reduce your PLL or increase heat dissipation。 But I think the current HWE will not reduce your hash rate from our experience.

The latest Spec. is here.

We have already realized all of your good suggestions. You could have a try if convenient. Thanks. https://www.dash.org/forum/threads/ibelink™-dm384m-asic-dash-miner-support-thread.8148/page-9

So it is here. https://my.pcloud.com/publink/show?code=XZgUuhZfr48aN0wreLJ2W0D1ms4NmXmxV0k Update list: 1. Fixed some bugs 2. Added web login 3. Improved the pool config 4. Updated the web UI

We will release it about 3 days later after fully tested, please wait for moment. Thanks.

Of course, please focus on our latest version image which will release recently, thanks.

Hi iRybin: You are a respected geek without doubt. We will consider your good advice and make improvements. Thanks

Could you re-plug the fourth blade and the power up again to have a try, if issue again, please leave your email to us, we will invite you into our slack to talk with you.

It should be our mistake, we take it for granted that the user will deal with it. We hope that it no bother our user for a long time. Thank you for your pertinent advice.

Thanks to andhum for shared your experience. Yeah, it is right way to add your priority 0 pool.

Could you send the pic of web homepage after restart to our email: [email protected]. Thanks

I basically confirmed that it was a question of mining pool, while not the miner box, please refer to FAQ: Why some mining pools rejection rate is very high? Due to hash rate of the iBeLink mining machines is very high, dozens of times of general GPU, some mining pools are unfriendly to ASIC...

Yeah, the latest image compatible the batch 1 miner box, excpect the temp monitor due to no sensor installed.

Static IP function is valid for batch 1 also.

This spec. adds static IP function, if you do not care about it, you could not reflash TF card. If you need it, you should reflash it first.

Good suggestion, we will consider to add the function to configure the pool list more easy in the new version.

If you want to set the pool as default pool, which will mining first after restart, please put the pool at the first position in the pool list, not only set the priority to highest, and do not forget to save configuration.

Due to the quick restart function(about 10s), the impact of the hash rate can be ignored even restart one time every 20-30 minutes, from our test report. Of course, the miner status should be normal recovered from the restart process.

About the miner restart phenomenon, please refer to FAQ Why mining software automatically restart? Mining software support self recovery from network fault and drive fault function, with watchdog monitoring for the whole system , when an anomaly is detected, the mining software will...

It seem some hardware issue in it. Please make sure the connection line between Pi and LED lamp board is plugged in, it maybe loosed. And double check the PI works normally, of course, do not forget check the network link is good status. If possible, please replace the PI to test it. Any more...